Welcome to the Vapor Puffs guide on how to use the Vision Spinner 2. First we’ll take a look at the components of the Vision Spinner 2 and then we’ll show you how to use it.
What is the Vision Spinner 2?
The Vision Spinner is a variable voltage battery, that is adjusted by spinning the base at the bottom of the battery.
- Threading Connection – This part is found at the top of the battery, it’s the threading that will connect to the threading of the Atomizer.
- Power Button – Found on the face of the Vision Spinner 2, it’s use to turn the Spinner on and off.
- Variable Voltage Ring – This part is at the very bottom of the Spinner 2, using the values written around the Spinner, you can set your Voltage to any of the options available by turning this ring.
How To Turn On The Vision Spinner
As with most batteries in the vaporizer world, the Vision Spinner is turned on and off by pressing the power button 5 times consecutively and rapidly. If done correctly, the power button should blink it’s lights a few times. This method allows for the Battery to output a higher temperature and is used as a safety feature so the Spinner doesn’t activate without your knowledge.
How To Use The Vision Spinner 2
- Attach the Atomizer
Line up the Threading Connection on your atomizer to the Spinner 2 and then turn it until it’s tightly secured. If you plan to adjust the Variable Voltage output, now would be the time.
- Turn On The Vision Spinner 2
Turn on the Spinner 2 by using the method above. Once you see the lights, you’re good to go.
- Begin Vaping
Hold up the mouthpiece of your atomizer to your mouth and hold down on the power button on the Vision Spinner 2. From this point on, you should be able to pull from your Spinner and everything should come naturally.
Thanks For Reading Our Guide On How To Use The Vision Spinner 2
We hope we’ve helped you figure it all out.