• Guide: How To Use The K800 Vaporizer

    Welcome to the Vapor Puffs guide on how to use the K800 Vaporizer! We’re going to start by looking at the individual parts of the Kamry K800 and then move onto showing you how to use the K800 Vaporizer.

    What Is The K800 Vaporizer?

    The K800 is a bullet shaped eliquid vaporizer with a rebuildable tank. Let’s take a look at the parts.

    How To Use The K800 Vaporizer

    From Left to right, Mouthpiece (under cap), Atomizer, Coil Unit (inside Atomizer), Airflow Ring, Battery, and Power Button (under cap).

    • Mouthpiece – This part is hidden underneath the cap at the top of the K800. You’ll be putting your mouth on it.
    • Atomizer – The eliquid will go in here.
    • Coil Unit – Hidden inside the Atomizer, this unit is connected to the bottom ring of the Atomizer. This part is heating element in the vaporization process.
    • Airflow Ring – This gold ring has two vent holes and is found right below the atomizer.
    • Battery – This is the biggest part of the K800 and the only part you can’t access. That’s alright though, as it’s a very strong battery.
    • Power Switch – This is hidden underneath the cap at the bottom of the K800.

    How To Turn On The K800 Vaporizer

    This is sometimes a confusing part for first timers. You’ll begin by removing the cap at the bottom of the k800 and then you’ll press the button 5 consecutive times to turn it on. If you want to turn it off, you’ll press it 5 consecutive times again. When you’re ready to begin vaping, you’ll turn it on and hold down the button to begin the vaporizing process.

    A lot of people ask us why would the vaporizer require you to press the button 5 times to turn it on/off? There’s two answers, one is that it allows the vaporizer to heat up to higher temperatures at a faster rate. Second, it’s a safety feature so that you aren’t accidentally turning it on in your pocket.

    How To Use The K800 Vaporizer

    • Fill the Atomizer with eLiquid

    You’ll begin this step by removing the Atomizer from the Battery. This is done by turning the Atomizer counter clockwise to the battery. Once that’s removed, you have to remove the bottom ring of atomizer too, with it you should see a Coil Unit come out. Now, fill up the K800 Atomizer but do not get eLiquid inside the tube in the center, as that goes to the mouthpiece. Instead, pour your eLiquid outside of that tube, until you are slightly less than halfway filled. Then, re-attach the Coil Unit and the bottom part by lining it up to the tube inside of the atomizer and turning it clockwise. Then, reattach it to the battery.

    • Begin Vaping

    Now, now remove the caps at both ends of the K800 by pulling them off (not twisting) and turn on the K800 using the steps above. Just hold down the button when your ready and you should be able to begin vaping with no issue.

    Thanks for Reading Our Guide On How To Use The K800 Vaporizer!

    We hope you have a clear understanding on how the K800 works and how to make it work for you.

    Buy it Here: K800 Vaporizer

    Happy Vaping!

     

  • Caravela Mech Mod Guide: How To Use The Caravela Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the Caravela Mechanical Mod! First we’re going to go through the individual parts and their functions. After that, we’ll show you how to turn on and use the Caravela Mechanical Mod.

    What Is The Caravela Mechanical Mod?

    The Caravela Mechanical Mod is a fully analog mod that uses two silver plated contacts and a floating silver plated center pin. It’a made of stainless steel.

    • Bottom Contact – This will make contact with the battery when it’s inside the Caravela Body. It’ll also function as the On/Off switch when you press down or let go of the center.
    • Caravela Body– This is the hollow tube your battery will be placed within.
    • Threading Connection – This part will also make contact with the battery inside of the Caravela. On the outside, it’ll be used to connect your atomizer.

    How To Turn On The Caravela Mechanical Mod

    The Caravela is turned on when the both contacts inside of it are touching the battery. So, when you want to begin the vaporizing process you just hold down the button on the bottom contact. When you’re not using it, you let go. Unfortunately, the Caravela doesn’t have a locking mechanism so be careful if you’re just carrying it around.

    How To Use The Caravela Mechanical Mod

    • Insert the Battery

    Remove the Bottom Contact and place the battery inside. Then, reattach the Bottom Contact. If it touches both contacts at any time (even if not connected to your atomizer) it’ll begin outputting power.

    • Attach an Atomizer and Begin Vaping

    Now attach your atomizer to the threading at the top of the Caravela Mechanical Mod. You’ll do this by turning the atomizer’s conductor clockwise into the center of the threading until it is firmly attached. Once you’re ready to begin vaping, you can push down and hold the center of the Bottom Contact to begin the vaporization process.

    Thanks For Reading Our Guide On How To Use The Caravela Mechanical Mod

    We hope you’ve gained a clear understanding of how it works and how to make it work for you.

    Buy it Here: Caravela Mechanical Mod

    Happy Vaping!

  • Guide: How To Use The EVOD Vaporizer

    Welcome to our Guide on how to use the EVOD Vaporizer! We’re going to show you how to use the EVOD Vaporizer and how the individual parts work.

    What Is The EVOD Vaporizer?

    The EVOD Vaporizer is an eLiquid only vaporizer that comes with two eLiquid vaporizing pens per box. Lets take a look at how it works.

    Guide: How To Use The EVOD Vaporizer

    From Top Left to Bottom Right, The Mouthpiece connected to the Liquid Body, Coil unit, Battery Connection, and the Battery.

    • Mouthpiece – This is where your mouth goes. Nothing special here.
    • Liquid Tank – Your eLiquid goes in here.
    • Coil Unit – This part is normally hidden inside the Liquid Tank, it contains the heating coil that will be vaporizing the eLiquid.
    • Battery Connection – This ring will hold the coil and connect to the battery.
    • Battery – This piece will power on and off your EVOD Vaporizer.

    How to Turn On The EVOD Vaporizer

    For first time users, one of the more confusing parts of using a vaporizer is usually turning it on. The EVOD Vaporizer is turned on or off but pressing the silver button located on the battery 5 consecutive times. You then hold the silver button again to start the vaporization process.

    Why is this the method of turning on a vaporizer? For one, it’s a safety feature to make sure you aren’t using it while it’s in your pocket or wasting the battery by just having it on. Second, it allows the vaporizer to reach higher temperatures for a better vaporizing experience.

    How To Use The EVOD Vaporizer

    • Fill the Liquid Tank with eLiquid

    First thing you’ll need to do is remove the Liquid Tank from the Battery Connection. You’ll do that by turning the Liquid Tank counterclockwise to the battery. Once It’s open, you should see a hole in the center (shown below) that leads to the mouthpiece. You’ll be placing your eLiquid around the center tube, otherwise the eLiquid will come right out of the mouthpiece. Don’t overfill it, you want to make sure that the eLiquid doesn’t go above the tube. Once your done, flip the Battery part you detached earlier and reattach it to the Liquid Tank by lining up the Coil Unit to the inner tube inside the Liquid Tank.

    How to Use the EVOD Vaporizer

    The Tube in the center of the Liquid Body leads straight into the mouthpiece.

    • Turn On The Vaporizer and Begin Vaping

    Next, just turn on the EVOD Vaporizer, hold down the silver button, and put the mouthpiece to your mouth and pull. Your vaporizer should be working now and vaping should come easily.

    Thanks For Reading Our Guide On How To Use The EVOD Vaporizer!

    Happy Vaping! 🙂

    Check the EVOD PRO!

  • Maraxus Mechanical Mod Guide: How To Use The Maraxus Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the Maraxus Mechanical Mod! This guide will begin with an introduction to the individual parts of the Maraxus and then we’ll show you how to make it work.

    What Is The Maraxus Mechanical Mod?

    The Maraxus Mechanical Mod is a fully analog mod that makes use of two gold-plated brass contacts and a floating center pin. It’a made of stainless steel, and is telescopic to allow for different battery sizes.

    How To Use The Maraxus Mechanical Mod

    From Left to Right, Bottom Contact, Maraxus Telescopic Body, and Threading Connection.

    • Bottom Contact – This piece will make contact with the battery inside of the Maraxus. It also will function as the On/Off switch by pressing down on the center.
    • Maraxus Telescopic Body– This is the hollow tube your battery will be placed within. By twisting either end, you can change the size of the body so that it can fit different kinds of batteries. One of two airflow rings on the Maraxus is connected to this part.
    • Threading Connection – This part will also make contact with the battery inside of the Maraxus. On the outside, it’ll be used to connect your atomizer. The second airflow ring is found right underneath this part.

    How To Turn On The Maraxus Mechanical Mod

    The Maraxus doesn’t have a formal off/on switch but unlike many of it’s competitors, it does give you a hint as to how turn it on and off. The way the Maraxus works is when the battery is touching the contacts on both sides of the Maraxus Body, it is turned on. Once the battery is inside, you can push and hold down the center part of the Bottom Contact and it will begin the vaporizing process.

    How To Use The Maraxus Mechanical Mod

    • Insert the Battery

    Remove the Bottom Contact and place the battery inside. If your battery doesn’t fit, twist the Maraxus Telescopic Body until it extends over the battery. Then, reattach the Bottom Contact.

    Note: If the Battery at any time touches both contacts inside the Maraxus, it will turn the battery on.

    • Attach an Atomizer and Begin Vaping

    Now attach your atomizer to the threading at the top of the Maraxus Mechanical Mod. You’ll do this by turning the atomizer conductor clockwise into the center of the threading until it is firmly attached. Once you’re ready to begin vaping, you can push down and hold the center of the Bottom Contact to begin the vaporization process.

    Thanks For Reading Our Guide On How To Use The Maraxus Mechanical Mod

    We hope you’ve gained a clear understanding of how it works and how to make it work for you. Thanks for Reading!

    Buy it Here: Maraxus Mechanical Mod

    Happy Vaping!