• Guide: How to use Hydrology9

    One of Best Hi-Tech Products in the market Hydrology9 by Cloudious9

    Hydrology9 only has one button press it three times to turn it on, you then push it 1 more time and it will start heating up. To change the temperature of the device, it needs to be on. It can be heating up or held at a set temperature. Each time you press it will rise upwards to the next highest setting. The temperature for the 5 preset settings are as followed. Cloudious9 intentionally has the highest setting set to above the point of combustion for those who want a bigger hit.

    Hidrology_9_vaporpuffs.com

    Lights on Hydrology9 and Temp Settings

    Blue – 200C– 392F

    Greenish Yellow – 210C – 410F

    Orange – 220C – 428F

    Purple – 230C – 446F

    Red – 240C – 464F

     

    Temperatures

    The Hydrology9 has five preset temperatures that are indicated by 5 different colored flashing lights. Blue is the lowest temperature setting and red is the highest. In order to turn the device on you need to push the power button quickly three times. Then to choose a heat setting you press the power button again once. This will activate the Hydrology9 and begin heating it to the previously set temperature.

    If you want to switch through to a different heat setting you just push the power button again, each time your press it, it will flash a different color. The Hydrology9 will continue to flash one of the five colors until the temperature has reached the current setting. After about 50 seconds the LED lights will stop flashing and will turn solid green. Solid green means the Hydrology9 is ready and you should begin inhalation.

    It is recommended that users leave for 3 to 5 seconds in between each inhalation. This, to allow the oven to get back to the desired temperature. Each session will last 2 minutes, followed by a 60 second cool down. The solid green light will turn flashing blue then solid blue for 60 seconds. After, the blue light turns off you can press the power button to start a new session.

    In case, you are a vaporizer geek that wishes to have the cutting-edge-day and best unit on the market. You’ll want to get your fingers on the Hydrology9.

    hidrology9_vaporpuffs.com

    Battery

    The Hydrology9 is built with an internal 2000 mAH Lithium Polymer battery that lasts around 11-15 sessions it 2 minutes per average session, takes two to three hours to get back up to full charge.

    The vaporizer industry become starting to get boring, besides a few mentions. Furthermore, this guys rock the industry with innovation, pushing the boundaries.

    It´s definitely a must! So, pack your favorite Herbs, adjust the vents and temperature. Yes! you are ready to Puff! A big round of applause to the designer of this well-made vaporizer!

    Happy Vaping! 🙂

    Get more info vaporpuffs

  • Guide: How to Use the Firefly 2 Vaporizer

    How to use the Firefly 2 Vaporizer

    A step by step on how to use the Firefly 2 Vaporizer, and to get the perfect hit from one of the Best vaporizers in the market.

    Well, the answer to that, is right here!

    Indeed, opening your new Firefly 2 vaporizer is an aesthetic delight – but how do you get the most out of your gorgeous new purchase? Here are some tips and tricks that get your new Firefly 2 working for you just how it should. It’s not difficult; just follow this how-to guide to get that massive, delicious hit you’ve been searching for…

    Before using your Firefly 2 you may want to install and update the software from your phone. This is not necessary, but it is advisable. The process is quick, and it will give you more control over the temperature. You can find instructions on how to install the software at the end of this guide.

    How to use the Firefly 2 Vaporizer

    1. To use the Firefly 2 vaporizer, lift off the top cover – it’s magnetized and should pull off easily. Your favorite dried herbs will be put into the circular heating chamber.

    2. How much you pack in, and how finely ground it is, greatly affects how the Firefly hits. I would recommend grinding it up very coarse, coarser than you would think.

    3. Sprinkle it into the heating chamber loosely, then gently tamp down with your finger, but do not push it in hard. Be careful not to over pack the chamber. Packing it in this way helps deliver a smoother and more intense hit. Having said that, it also works really well if you are lazy and decide to just shove an unground up nug in there, when you don’t feel like or can’t use a grinder.

    4. After loading it, place the top back on the Firefly 2. You should feel the magnets pull it into place with a satisfying snap.

    Now, Ready to Go!

    5. YES! You are now ready to hit your Firefly 2! Pick the vaporizer up in the palm of your hand and place your index fingers on both of the two capacitive buttons on the sides. Hold your fingers there, until you see the LED on top turn solid green. Keep holding the buttons, put your lips on the mouthpiece and start to draw the air in. Many convective vaporizers require you to pull very softly to get the best hit, making them difficult to use, as they only have a small margin of error. However, the Firefly 2 requires a very natural, effortless draw. Not too hard, not too soft – imagine you are smoking a pipe. It’s easy to get the perfect draw – especially if you don’t overthink it.

    6. As you hit it, you will notice the flavor change after a few draws. Once you begin to taste burnt popcorn, it’s almost done, and you need to reload the bowl soon. Opening up the Firefly 2 vaporizer, and giving the heating chamber a little stir will let you get a few more draws out of it. If you don’t have anything available to stir it with, give it a few light smacks on your palm to move what’s inside around a bit.

    7. While you are using your Firefly 2, make sure you are always charging the extra battery! The Firefly 2 comes with two, so if you charge one while using the other, you’ll never have to prematurely end your session because the battery ran out.

    8. After using the Firefly 2 vaporizer, make sure to clean it thoroughly according to the instructions in the box. Cleaning the Firefly 2 is easy, and even easier if you do it right after finishing your session. If you neglect it, the heating chamber can get sticky over time. Every once in a while, lightly dampen some lint-free cloth or paper with rubbing alcohol. Then gently wipe clean the inside to keep it in great condition so you can use it for years to come.

    Installing The Firefly 2 Vaporizer Software Onto Your Device

    The Firefly 2 vaporizer has an available software update, which gives you additional ways to adjust your device. The software is available on either Android or iOS, and the process is simple and quick:

    • Install the “Firefly Vapor” app on your smartphone from the iTunes app store or Google Play.
    • Make sure your phone has Bluetooth on, turn on the app, and follow the instructions on screen.
    • You now have access to settings that allow you to completely fine-tune your Firefly 2 vaporizer.
    • After selecting a temperature setting, you can now adjust the power curve to modify the heating profile. A hotter setting will hit harder, and a lower one will be tastier longer. But be careful, as the hottest setting with the power curve on max is just about hot enough to cause combustion, and too low a temperature will not give satisfying draws.
    • Play around with it to find your preferred sweet spot.

    Happy Vaping! 🙂

    Get more info vaporpuffs

  • Guide: How To Use The Vamo V5

    Welcome to the Vapor Puffs guide on how to use the Vamo V5! We’re going to begin by breaking down the components of the Vamo V5 and then move onto showing you how to use it.

    What is The Vamo V5?

    The Vamo V5 is a Vaporizer Battery with an accessible battery chamber, extension tubes, and a LCD Screen that allows you to adjust Voltage and Wattage.

    vamo-v5-vaporizer-ecig-kit-2

     

    • Threading Connection – Found at the top of the Vamo V5, this part connects to the Threading Connection that’s found at the end of an atomizer. The Vamo V5 has a second Threading Connection that can be found by removing the ring at the top of the Vamo V5.
    • LCD Screen – This Screen is used to change the Voltage and Wattage of the Vamo V5. The two buttons found under screen will change the values.
    • Power Button – Underneath the LCD Screen, this turns the Battery on, off and begins the vaporization process.
    • Extension Tubes – The Vamo V5 comes with two small tubes that can be connected together in order to allow a bigger battery to be placed inside. The tubes are followed by a small cap.

    How To Turn On The Vamo V5

    The standard method for turning these kinds of vaporizers on or off is to press the power button 5 times consecutively and rapidly. You’ll know it’s been turned on because the power button will flash. The reasoning for this method is to allow a greater temperature output from the Vamo V5 Vaporizer and as a safety function to keep it from turning on without your knowledge.

    How To Use The Vamo V5

    • Insert the Battery

    Remove the extension tubes from the part with the LCD Screen and Power Button. Insert your batteries into the tube and then reattach it to the Vamo main part.

    • Turn On The Vamo V5

    Using the method above, turn on the Vamo V5. You should see the light on the power button flash once it’s on.

    • Attach Atomizer

    Once all that’s done, attach the Atomizer to the Vamo V5 and hold the power button when you’re ready to begin vaping. Everything should come naturally from here.

    Happy Vaping!

    Get more info vaporpuffs

     

     

     

     

    Originally published April 23 2013, updated August 23 2017

  • Guide: How to Use the Dragon Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the Dragon Mechanical Mod. We’ll start off by giving a brief introduction to the parts of the Dragon Mechanical Mod and then move onto showing you how it works.

    What is the Dragon Mechanical Mod?

    Made entirely out of copper in order to increase conductivity, the Dragon Mechanical Mod is a fully analog mod sized for 18650 batteries.

    dragon-mechanical-mod-2

    • Threading Connection – At the top of the Dragon is a 510 threading connection that can be removed by twisting it counter-clockwise. Your atomizer will connect to this part. On the inside, a silver plated contact can be found.
    • Battery Tube – This is where your battery will go. It can be accessed by removing either cap at the top or bottom.
    • Firing Button – Found at the bottom, the Dragon’s firing button works a little differently than most. Rather than having a spring that requires you to hold the button down, it’s just pushed in or left out, without the need for you to hold it down. With this new firing button idea, the Dragon also has a lock mechanism which is activated by twisting the firing button to the right while it is in the off position.

    How To Use The Dragon Mechanical Mod

    • Insert the Battery

    Remove the firing button by twisting it counter clockwise. Then, insert your battery with the positive side facing the atomizer side. Re-attach the firing button.

    • Attach Your Atomizer

    Now, grab your atomizer and attach it to the threading connection at the top. While connecting, make sure the firing button is not pushed in.

    • Begin Vaping

    Now with everything connected, push in the firing button. The vaping process should start, and everything should come naturally at this point.

    Thanks for Reading Our Guide on How to Use the Dragon Mechanical Mod!

    We hope we’ve helped you figure out how to get it working.

    Buy it Here: Dragon Mechanical Mod

    Happy Vaping!