Category Archives

    Informational

  • All
  • King Sword Guide: How To Use The King Sword Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the King Sword Mechanical Mod. We’re going to look at the individual parts before moving onto how to actually make use of the King Sword.

    What Is The King Sword Mechanical Mod?

    The King Sword is a fully analog stainless steel mod, made to look like a sword hilt hence the name. It uses two copper plates to make contact with the battery inside.

    how to use the king sword mechanical mod

    Threading Connection on the left, Firing Button with Locking Ring in the locked position on the right.

     

    • Threading Conection – Located at the top of the King Sword, the threading connection is where you’ll connect your atomizer. It has six air vents on it, and is attached to one of the copper plates within the King Sword.
    • Tube Body – You’ll be putting the battery in here.
    • Firing Button – When held down, the plate connected to this button will make contact with the battery inside beginning the vaporization process. Attached to it, is a Silver locking ring that can be turned clockwise to lock the Firing Button.

    How To Use The King Sword Mechanical Mod

    Note: We recommend setting the locking ring to the locked position until you’re ready to begin vaporizing.

    • Insert the Battery

    Remove the Threading Connection by turning it counter-clockwise to the Tube Body. Once it’s removed, insert the battery into the Tube Body.

    • Attach Your Atomizer

    Once the Battery is inserted, reattach the Threading Connection. Now, attach your atomizer to the Threading Connection.

    • Unlock and Begin Vaping

    Unlock the Locking Ring and hold down the Firing Button. At this point the Vaporization process should begin and everything should come easy.

    Thanks For Reading Our Guide On How To Use The King Sword Mechanical Mod!

    We hope you’ve got a clear understanding on how the King Sword Mechanical Mod is used.

    Buy it here: King Sword Mechanical Mod

    Happy Vaping!

  • PG vs VG PG vs VG: What’s the Difference?

    You probably have seen things like “50/50 PG/VG” or “70% VG/30% PG” when looking for eLiquid. If you’re new to vaping, you may be wondering what that’s all about. eLiquids are made from four things: water, flavorings, nicotine, and the base, which is what PG and VG refer to. PG stands for propylene glycol, while VG stands for vegetable glycerin, and the ratio of these two different bases greatly changes how an eLiquid vapes!

    What’s Propylene Glycol?

    Propylene glycol is a clear, runny liquid, with absolutely no taste or smell. High PG eLiquids tend to give more of a throat hit when vaped, which is nice if you’re trying to mimic the feeling of cigarettes. The neutral flavor profile also allows the eLiquid’s complexity to come through unmasked. Be warned that some people are allergic to propylene glycol, so if you notice any negative side effects when using a PG-blend eLiquid, you might want to consider trying vegetable glycerin and seeing if it goes away!

    What’s Vegetable Glycerin?

    Vegetable glycerin is thicker than PG, with a mildly sweet taste. 100% vegetable glycerin eLiquid has almost no burn at all, and produces massive clouds! The higher viscosity of VG helps prevent leaks, but can lead to gunk building up on your coils. With regular cleaning and maintenance, this shouldn’t be an issue, but it’s definitely something to be aware of!

     PG vs VG: Which do I want?

    The choice of what ratio of PG to VG you want in your eLiquid is almost entirely based off of personal preference. A 50/50 blend is a great starting point, with a balance of clear flavor and cloud production. For more savory flavors, stay away from high VG blends, unless you’re okay with some sweetness in there. If you’re looking to impress your friends with some crazy clouds, or practice neat vapor tricks, an eLiquid with a lot of VG, probably 70% or over, is definitely what you looking for.

    Happy vaping!

  • Pegasus Mechanical Mod Guide: How To Use The Pegasus Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the Pegasus Mechanical Mod. We’re going to take a look at the parts of the pegasus first, and then show you how to use it.

    What is the Pegasus Mechanical Mod?

    The Pegasus is a fully analog mod, made of entirely out of copper. It’s got vent holes hidden underneath the firing button and only fits one size battery.

    How to Use The Pegasus Mechanical Mod

    Threading Connection (Top, not shown), Battery Tube, Firing Button (Locking Ring in off position)

     

    • Threading Connection – The Atomizer will be connected to this part. The Pegasus uses a 510 Threading Connection. This part also has a plate that will make contact with the battery.
    • Battery Tube – This is where the battery will be placed. The Pegasus only fits a 18650 battery.
    • Firing Button – When this button is held down to make contact with the battery, it will begin the vaporizing process. Attached to the Firing Button is a locking ring, when spun counter-clockwise this ring will keep the Firing Button from being able to start the vaporizing process.

    How To Use The Pegasus Mechanical Mod

    • Insert the Battery

    Remove the Threading Connection from the the Battery Tube by spinning it counter clockwise. Insert your 18650 battery into the Battery Tube and reconnect the Threading Connection.

    • Attach The Atomizer

    Now, attach the Atomizer to the Threading Connection by twisting it clockwise while keeping the connector centered to the hole.

    • Begin Vaping

    Once you’re ready to begin, hold down the firing button in order to begin the vaporizing process. When it’s not in use, we recommend using the locking ring to keep from wasting battery power and eLiquid.

    Thank For Reading Our Guide On How To Use The Pegasus Mechanical Mod!

    We hope we’ve helped you figure out how to use your mod!

    Buy it Here: Pegasus Mechanical Mod

    Happy Vaping!

     

  • Guide: How To Use The V3R Flip Mechanical Mod Guide: How To Use The V3R Flip Mechanical Mod

    Welcome to the Vapor Puffs guide on how to use the V3R Flip Mechanical Mod! First, we’re going to introduce you to the V3R Flip and it’s parts, then we’ll show you how to use it.

    What Is The V3R Flip Mechanical Mod?

    The V3R Flip is a fully analog mod that uses two extension tubes in order to fit different size batteries. What makes it special, is that the extension tubes are always attached to the V3R Flip and are literally just flipped to extend the battery size. Let’s take a look at the parts.

    Guide: How To Use The V3R Flip Mechanical Mod

     

    • Threaded Connection –  You’ll be connecting the atomizer to this part of the V3R Flip. You can also remove this in order to insert the battery.
    • Extension Tube – This part is hiding a set of vent holes underneath it, and can be flipped in order to extend the battery size. To do that, remove the part by turning it counter-clockwise, remove the Threaded Connection that’s on top the same way, and then flip the tube and reattach it.
    • Battery Tube – This is the tube that will be holding the battery, together with the extension tubes.
    • Power Button – Located on the bottom, when held and bushed it’ll begin the vaporizing process once everything is ready. It also contains a locking mechanism which you activate by turning the button clockwise. It can be removed in order to insert the battery.

    How To Use The V3R Flip Mechanical Mod

    • Insert the Battery

    Remove either the Threaded Connection or Power Button and place the battery inside. If it doesn’t fit, remove one or both of the extension tubes, flip them over, and reattach them. Once the battery is inside, reattach the side you removed and make sure everything is firmly secured.

    • Attach Atomizer and Begin Vaping

    Now, attach the Atomizer to the Threaded Connection on the V3R Flip. Once it’s attached, push and hold down the power button in order to start the vaporizing process. From here on, everything should come naturally.

    Thanks For Reading Our Guide On How To Use The V3R Flip Mechanical Mod!

    We hope you’ve gained a clear understanding of how it works and how it’s used.

    Buy it here: V3R Flip Mechanical Mod

    Happy Vaping!