Category Archives

    Guides

  • All
  • how to use the aerotank turbo Guide: How To Use The Aerotank Turbo

    Welcome to Vapor Puffs guide on how to use the Aerotank Turbo by Kanger. The guide will start by looking at the individual parts that make up the Aerotank Turbo, and then give you a step by step guide on how to use it.

    What Is The Aerotank Turbo?

    The Aerotank Turbo is one of the latest upgrades to Kanger’s Aerotank atomizers. The Aerotank Turbo’s biggest and most noticeable change is the huge 6.0 ml capacity, which adds a lot of girth to the atomizer.

    how to use the aerotank turbo

    • Mouthpiece – This is where your mouth goes. It’s replaceable.
    • Mouthpiece Ring – This ring is what the mouthpiece connects to. It can be removed and replaced if necessary.
    • eLiquid Tank – This is where the eLiquid is stored. It’s the biggest part of the atomizer.
    • Coil Unit – The Aerotank Turbo uses two coil units that are hidden within the eLiquid Tank.
    • Connection Ring – This is the ring that has the Kangertech writing and Arrows on it. Twisting this ring clockwise loosens the connection to the eLiquid Tank, allowing you to access the Coil Units.
    • Airflow Ring – This Ring turns only turns a short amount. By turning it clockwise you open up more airflow slots.
    • Threading Connection – This is the small threaded part on the back end of the Aerotank Turbo. It’ll be the part that connects to your battery.

    How To Use The Aerotank Turbo

    • Fill the eLiquid Tank

    Turn the Connection Ring clockwise until the eLiquid Tank detaches from the base. Flip over the eLiquid Tank and you’ll see two empty tube (these lead to the mouthpiece, and will be filled by the Coil Units). Drip your eLiquid against the sides of the tank until it’s just below those two tubes, then reattach the base by lining up the Coil Units to the tubes, and twisting the ring counter-clockwise.

    • Adjust the Airflow Ring

    Set the airflow to whatever preference you prefer by twisting the Airflow Ring until you are at the amount of air holes you want uncovered. This can be adjusted at any time.

    • Attach to Battery

    Line up the Threading Connection to your battery and twist clockwise until it’s firmly attached. Then turn on your battery, and begin the vaping process. Everything should come naturally from here.

    • Replace the Coil Units

    After some amount of uses, you might notice the quality of your vaping starting to lessen. When that happens, it’s time to replace the Coil Units.

    Remove the eLiquid Tank from the base by turning the Connection Ring clockwise. Once it’s detached, you’ll notice two very thin tubes sticking up from the base. Turn each one counter-clockwise until they are detached. Then, attach the new ones by lining up the threading and twisting clockwise. Now, reattach the eLiquid Tank, and you’re all done.

    Thanks For Reading Our Guide On How To Use The Aerotank Turbo!

    We hope we’ve helped you figure out how to get it working.

    Buy It Here: Aerotank Turbo

    Happy Vaping!

  • Guide: How To Use The Aerotank Mega

    Welcome to the Vapor Puffs guide on how to use the Aerotank Mega atomizer. We’ll start the guide off with a brief introduction to the Aerotank Mega and it’s parts, and then move onto the guide showing you how to use it.

    What Is The Aerotank Mega?

    Made as an upgrade to Kanger’s original Aerotank, the Aerotank Mega is an adjustable airflow atomizer that is seen as easier to use than it’s predecessors. Let’s take a look at the parts.

    kanger-aerotank-mega-5

    • Mouthpiece – This is where your mouth will go. It can be removed by twisting and pulling from the top, in order to be replaced with another or cleaned.
    • eLiquid Tank – This glass part is where your eLiquid will be held. It can be replaced with the stainless steel tank that comes in the box (and is pictured above).
    • Coil Unit – Hidden within the tank is the Coil Unit. It can be accessed by removing the Threading Connection and replaced with other compatible Coil Units. It contains the wicks and heating element that will vaporize the eLiquid.
    • Airflow Ring – A ring with small dents all around it and one specific hole, this can be turned in order to adjust the amount of air that goes through the atomizer.
    • Threading Connection – The Threading Connection is the small part sticking out from the bottom of the Aerotank Mega. It’s a 510 threading that will be used to connect to a battery.

    How To Use The Aerotank Mega

    • Fill the Tank

    Grab the atomizer right on the ring between the Threading Connection and Airflow ring and twist counter-clockwise in order to open the tank and reveal the Coil Unit. When dripping the eLiquid into the tank, make sure not to drip into the center hole as it leads to the mouthpiece. Instead, drip into the four smaller holes that are closer to the walls of the tank.

    Once you’ve finished filling the tank, reattach the base by lining up the Coil Unit with the center tube and twist counter-clockwise.

    • Set the Airflow

    By twisting the Airflow Ring you can change the amount of air that flows through the atomizer. You can do this at any time while using the Aerotank Mega and you can see how much air you’re allowing into it by peeking into the small hole on the ring. While twisting it, you should notice the airflow trench that is behind the ring expand as you twist it clockwise, meaning more air will go through the atomizer.

    The Airflow setting is entirely based on personal preference.

    • Attach to Battery

    Line up the 510 Threading Connection to a battery that also uses 510 threading. Once connected, turn on the battery and begin vaping. Everything should come easily from here.

    • Change the Coil Unit

    This doesn’t have to be done after every use, but eventually you will notice that the Atomizer might not be giving off a taste as strong as before or just might not be heating up enough. When it reaches that point, it’s time to change the coil.

    Remove the base of the Aerotank Mega the same way you did before in order to pour in eLiquid. Now, grab onto the small tube that is the coil unit and twist counter-clockwise. It should easily come off. The Aerotank Mega comes with an extra Coil Unit in the box, so take that Coil Unit and place it in the old unit’s spot by twisting it counter-clockwise against the base. Once it’s firmly attached, you’re good to go.

    Thanks For Reading Our Guide On How To Use The Aerotank Mega!

    We hope we’ve helped you get it all figured out.

    Buy It Here: Aerotank Mega

    Happy Vaping!

  • Guide: How To Use The Vamo V6 Mod

    Welcome to the Vapor Puffs guide on how to use the Vamo V6 Mod! We’re going to start by breaking down the individual components of the Vamo V6 and then move onto showing you how to use it.

    What Is The Vamo V6?

    The Vamo V6 mod is the sequel to the very popular Vamo V5. It’s got a variable wattage system instead of variable voltage and has silver plated contacts and a silver spring. Let’s look at the parts.

    vamo-v6-variable-wattage-mod-2

    • Threading Connection – The Vamo V6 is 510 and Ego threaded, and this part at the top of Vamo V6 is where you’ll connect your atomizer.
    • Cosmetic Ring – This ring covers both threadings and can be removed. It’s purely for aesthetic value.
    • LCD Screen – The LCD Screen contains all the information about the Vamo V6. That includes current wattage, resistance, vaping time, puffs, and a few others.
    • Power and Wattage Buttons – Found right below the LCD Screen, the two smaller buttons are for adjusting the Wattage and going through the menu. The power button is the bigger button found below them that is used for turning on the Vamo V6 and initiating the vaporizing process.
    • Battery Tube – This is where the battery will go.

    How To Turn On The Vamo V6

    First, insert the battery into the Vamo V6. Then, press the Power Button 5 times in rapid succession. You should see the screen light up and show some text. To turn it off, it’s the same process.

    How To Use The Vamo V6

    • Attach Atomizer

    Attach your atomizer to the Vamo V6 by lining it up with either of the threadings on the Threading Connection piece and twisting it clockwise.

    • Turn On The Vamo V6

    Using the method outlined in the previous section, just turn on the Vamo V6. Once the lights come up, you should be good to go.

    • Adjust The Wattage (Optional)

    By pressing either of the small wattage adjustment buttons, you can adjust the Wattage up or down. You can also access the main menu by pressing and holding both buttons down at the same time. Once you’ve got the Vamo set to your preference, it’s time to start vaping.

    • Begin Vaping

    Bring the mouthpiece up to your mouth and hold down on the power button to begin the vaping process. From here on, everything should come naturally. You can adjust the Wattage at any time if you choose to, and if you’re interested in some of the ‘stats’ the Vamo V6 provides you can look through the menu for whatever you want to see.

    How To Charge Your Phone Using The Vamo V6

    The Vamo V6 comes with an attachment to turn the Threading Connection into a USB Adapter. For those looking to use the Vamo for this purpose, just enter the menu by holding down the two Wattage Buttons and then scroll down to Mobile. Once it’s on Mobile mode, it will act as a portable charger for any device inserted into the Vamo V6’s USB adapter.

    Thanks For Reading Our Guide On How To Use The Vamo V6

    We hope we’ve helped you figure it out.

    Buy It Here: Vamo V6 Variable Wattage Mod

    Happy Vaping!

  • How to use the emus vaporizer Guide: How To Use The EMUS Vaporizer

    Welcome to Vapor Puffs guide on how to use the EMUS Vaporizer. We’re going to start off by explaining what some of the individual parts do, and then explain how to use the EMUS.

    What is the EMUS Vaporizer?

    The EMUS is part of the Kanger family. It’s part of the same series as their other popular vaporizer pens like the EVOD and EMUS, sometimes referred to as the sequel to the EVOD. Let’s take a look at the parts.

    how to use the emus vaporizer

     

    • Mouthpiece – This is where your mouth goes. On the atomizer that comes with the EMUS, it’s removable and can be replaced with a mouthpiece you own.
    • eLiquid Tank – This is where your eLiquid will be stored, it’s filled through the bottom and has a 1.2 ml capacity.
    • Coil Unit – Hidden within the eliquid tank, this is attached to the Threading Connection and holds the wick that will be vaporizing your eLiquid.
    • Threading Connection – The bottom piece of the Atomizer, it’s the part that connects to the Battery.
    • Battery – The power source for the EMUS. It can not be accessed and is charged by connecting the threading connection to the USB charger that comes with the EMUS.
    • Power Button – Turns the battery on and off.

    How To Turn On The EMUS Vaporizer

    Many first timers in the eLiquid scene will have trouble turning on their starting vaporizer due to never experiencing an electronic that powers on this way. The EMUS, and most vaporizers, are turned on by pressing the power button 5 times in rapid succession. It’s turned off the same way. This is used to allow for a higher temperature output and as a safety feature.

    Holding the Power Button while the EMUS is on will begin the vaporizing process.

    How To Use The EMUS Vaporizer

    • Fill The Atomizer

    Keep the EMUS off at this time. Unscrew the Threading Connection at the bottom of the EMUS by twisting it counter-clockwise. Do not pour your eLiquid into the tube in the center of the tank, as that leads to the mouthpiece. Instead, drip the eLiquid against the sides of the tank. Fill it until its a bit higher than halfway, and then line up the coil unit with the center tube and twist clockwise until it’s firmly connected.

    • Turn On The EMUS

    Now that the EMUS is ready to go, use the method above to turn it on. Press the power button 5 times in rapid succession until you see the flashing LEDs.

    • Begin Vaping

    Bring the mouthpiece up to your mouth while you hold the Power Button and begin to pull. Everything should come naturally from here.

    Thanks For Reading Our Guide On How To Use The EMUS Vaporizer!

    We hope you’ve got it all figured out now.

    Buy It Here: Kanger EMUS Vaporizer

    Happy Vaping!