• Guide: How To Use The Protank 3

    Welcome to the Vapor Puffs guide on how to use the Protank 3 Atomizer! In this guide we will explain the individual parts of the Protank 3 as well as how to asemble and use the atomizer.

    What is the Protank 3?

    The Protank 3 is the latest model in a long line of highly recommended eLiquid atomizers released by Kangertech. The Protank 3 features an upgraded pyrex glass tank and comes with two heating coils.

    Let’s take a look at the parts:

    Guide: How To Use The Protank 3

    The Protank 3 in it’s Natural Habitat

    • Mouthpiece – You’ll be placing your mouth on this part.
    • Tube Body – This is the container where you’ll be placing your eLiquid.
    • Coil Units – These are what heat your eliquid inside of the Tube Body. The Protank 3 comes with two different coil units.
    • Connector – The connector is the base for the coil that connects the coil to the battery.

    How to Use the Protank 3:

    Guide: How To Use The Protank 3

    The Protank 3 Posing for the Camera

    So you know what each part does, let’s move onto how to use the Protank 3.

    • Insert the Coil Unit

    The Protank 3 gives you the options of choosing ether a 1 8ohm coil unit or a 2 4ohm coil unit. Choose whichever you prefer and we’ll begin placing it into the Protank 3.

    First, you’ll want to remove the connector at the bottom of the Protank 3 by twisting it counter-clockwise. Now, take your coil unit and place it into the side of the connector that goes into the Tube Body and then twist it clockwise until it is firmly attached.

    • Fill Up the Tank with eLiquid

    Simply insert the eliquid into the pyrex glass tank, make sure to put it into the side of the tank avoiding the tube body in the center. Make sure to use 2.5 ml of eliquid or less to avoid leaking.

    • Reattach The Connector

    Line up the Coil Unit to the air tube within the Tube Body then reattach the connector by twisting it clockwise.

    • Attach the Protank 3 to your Battery

    Simply screw it onto your battery of choice and you’re ready to go!

    Thank You for Reading Our Guide on How to Use the Protank 3!

    We hope you’ve found our Protank 3 how to guide helpful. Thanks for reading!

    You can buy it here: Protank 3 (Dual Coil)

    Happy Vaping!

     

  • Guide: How To Use The Snoop Dogg Micro G Pen

    Welcome to Vapor Puffs guide on how to use the Snoop Dogg Micro G Pen! We’ll begin by giving a brief introduction into how the parts of the Snoop Dogg Micro G work, and then move onto how to make it work for you.

    What Is The Snoop Dogg Micro G Pen

    Part of Grenco Science’s artist series, the Snoop Dogg Micro G Pen is the latest in a line of artist endorsed vaporizers that Grenco Science has put out. It’s a specially styled Micro G, that comes with some extra perks, one of which is the extra heating chambers (a very valuable asset to have). In this guide, we’ll be sticking to the Dry Herb version of the Snoop Dogg Micro G Pen (at the time of this post, a wax version isn’t available).

    Let’s take a look into the individual parts of the Snoop Dogg Micro G:

    Guide: How To Use The Snoop Dogg Micro G-Pen

    • Mouthpiece – You’ll be placing your mouth here.
    • Steel Mesh Filter – Built into the cover of the heating chamber, the Steel Mesh Filter is there to keep any solid pieces of dry herb from getting out of the chamber and into your mouth.
    • Spring – The Spring is there to keep your herbs tightly packed into the bottom of the heating chamber.
    • Snoop Dogg Micro G Heating Chamber – In here is where you’ll be placing your dry herbs. At the bottom of the heating chamber you can see a small coil, that coil is what will be heating up in order to combust your herbs.
    • Snoop Dogg Micro G Pen Battery – The final and most weighted part of the Snoop Dogg Micro-G Pen is the battery. It powers up the Snoop Dogg Micro-G Pen and has a USB 2.0 input at the bottom for charging.

    Note: We mention in the short description for the heating chamber that the Snoop Dogg Micro-G is combusting your herb. That’s because unlike traditional vaporizers, the model for the Snoop Dogg Micro G Pen has no space between the herbs and heating element (in this case a coil) causing the herbs to burn. If you’re looking for a vaporizer, instead of a combustion pen, we recommend the Snoop Dogg Micro G Pen’s brother, the regular Snoop Dogg G Pen, which has space for you to place a screen before your dry herb.

    How To Turn On The Snoop Dogg Micro G Pen

    The Snoop Dogg Micro G Pen is turned on or off by pressing the big button (with the MICRO lettering on it) 5-6 consecutive times. This kind of method for turning on the Micro G Pen allows for it to heat up to higher temperatures and keep from being accidentally turned on in your pocket.

    After turning on the Snoop Dogg Micro G Pen, you can activate the heating chamber by holding down that same MICRO button.

    Guide: How To Use The Snoop Dogg Micro G-Pen

    How To Use the Snoop Dogg Micro G Pen

    Now that you know how the Snoop Dogg Micro G Pen works and how to turn it on, we can move onto how to make it work for you.

    • Load Dry Herb Into The Heating Chamber

    We recommend doing this with the Snoop Dogg Micro G Pen turned off.

    First, remove the mouthpiece by pulling it off of the Battery. Next, grab onto the thin top of the Heating Chamber (the part holding the Mesh Screen Filter) and twist it counter-clockwise to remove it. It may take a little force the first time you remove it to get it to twist.

    With the cap of the Heating Chamber removed, now you can load your dry herb into the heating chamber. We recommend filling it only half way up.

    • Close The Heating Chamber

    With the dry herb packed, place the cap of the heating chamber back on and twist it clockwise to securely attach it. Then, re-attach the mouthpiece.

    • Begin Vaping

    Turn on the Snoop Dogg Micro G Pen by pressing the MICRO button 5-6 consecutive times. Put the mouthpiece up to your mouth, and hold down that same MICRO button to activate the heating coil within the heating chamber. Repeat until you’re satisfied.

    If you choose to refill the Heating Chamber, we recommend turning off the Snoop Dogg Micro G Pen. The Heating Chamber can get very hot. We also recommend cleaning the Heating Chamber after use, so you can get the most use possible out of each Heating Chamber. Ash buildup around the coil can stop the coil from working, so make sure to use the tools provided within the Snoop Dogg Micro G-Pen Kit to get as much of it out as you can.

    Thank You for Reading Our Guide on How to Use the Snoop Dogg Micro G Pen

    The Snoop Dogg Micro G Pen is a wonderful combustion pen that allows you to be discreet anywhere you go with your vaping habits. It’s great for use on the go, around the house, wherever. We hope you enjoyed reading our guide and now understand how to use the Snoop Dogg Micro G Pen.

    You can buy it here: Snoop Dogg Micro G Pen

    Happy Vaping!

  • Guide: How To Use The Game G Pen

    Welcome to the Vapor Puffs guide on how to use The Game G Pen! This guide will begin by introducing you to the individual parts of The Game G Pen then show you the steps for how to use The Game G Pen.

    What is The Game G Pen?

    The Game G Pen is one of the most colorful and standout pieces in the Grenco Science artist set. Although it’s sold as a wax only vaporizer, it’s possible to use other Grenco Science heating chambers (such as the Snoop Dogg G Pen Herbal Heating Chamber) to turn it into a dry herb vaporizer. In this guide, we’ll be sticking to the wax chamber to keep it simple though.

    So, let’s take a look at the parts:

    • Mouthpiece – Normally, all there would be to say about a Mouthpiece is that it’s where your mouth goes. For The Game G Pen, the Mouthpiece also has a built in mesh filter. The mesh filter is there to keep any stray particles from getting into the mouthpiece.
    • Wax Heating Chamber – Each Heating Chamber for The Game G Pen has three parts. First, there’s the outer shell, which you can easily remove by just pulling it. Next comes the hardened pyrex glass, which is made to be heat resistant. Then is the actual heating coil, clearly visible when you look inside. Don’t touch it during or after use, it’s going to get very hot.
    • Battery – The power source for the vaporizer.

    g-pen-the-game-vaporizer-5

    That’s all for the parts. This specific vaporizer is made to be simple and straightforward but many users, including us in the very beginning, have expressed difficulty with one important function of any vaporizer: turning it on.

    How To Turn On The Game G Pen

    Most first time vaporizer users have trouble figuring out how to power on the vaporizer because most of the common methods for turning on electronics don’t apply to vaporizers. For almost all electronic vaporizers (such as The Game G Pen) you turn it on or off by pressing the power button 5-6 times in succession. After turning it on, all you have to do to start the heating process is hold down the power button to take a hit.

    A lot of people have come to wonder why The Game G Pen (and many other vaporizers) have to be turned on using this method. There’s two reasons for it, it allows for the vaporizer to reach a higher temperature during the heating process and it keeps the vaporizer from being accidentally turned on when you’re on the go.

    How To Use The Game G Pen

    So now that you know what the individual parts do and you know how to turn on The Game G Pen, it’s time to move onto using it.

    • Remove The Mouthpiece

    In order to use The Game G Pen we’re going to have to first fill it with wax. This process begins with removing the mouthpiece by twisting it counter-clockwise.

    • Place Wax Into the Heating Chamber

    Using the G Tool that comes with The Game G Pen, place wax into the heating chamber. When it comes to putting wax into the heating chamber of The Game G Pen, we recommend a less is more approach. However, each user will have a different opinion about how much wax to use and if you feel like you aren’t getting the result you’re looking for then putting in more wax might solve your issues.

    After you’ve finished putting wax into the heating chamber, twist the mouthpiece back onto the heating chamber.

    g-pen-the-game-vaporizer-7

    • Begin Vaping

    Turn on The Game G Pen by pressing the power button 5-6 times. Begin by putting the mouthpiece to your mouth and then holding down the power button. At this point you should be feeling a hit of vapor coming as you pull, by breathing in, from the vaporizer.

    Repeat these steps as much as necessary until you’ve had your fill.

    Thanks for Reading Our Guide on How to Use The Game G Pen!

    We hope this guide has helped you figure out how to use The Game G Pen. It’s a wonderful wax vaporizer and it’s gorgeous red velvet look made us love it from the start, we hope you fall in love with it too.

    Buy it Here: The Game G Pen

    Happy Vaping!

  • KTS Mechanical Mod Guide: How To Use The KTS Mechanical Mod Vaporizer

    Welcome to the Vapor Puffs guide on how to use the KTS Mechanical Mod Vaporizer! In this guide we’ll be giving you a basic introduction to the KTS Mechanical Mod parts as well as a step by step guide on how to assemble and use the KTS Mechanical Mod.

    What is the KTS Mechanical Mod?

    The KTS Mechanical Mod is a telescopic mechanical body that connects to your battery and atomizer of choice. You might be asking, what does that mean? Well, to start the term ‘telescopic’ means that the body has the ability to extend or retract, allowing you to use almost any battery size available. The term ‘mechanical’ tells you that there are no electronic components in the vaporizer, it’s entirely analog.

    “So, what are the parts?”

    • KTS Body – The first part is the body itself, a large shell that will contain your battery.
    • Ignition – Sticking out from the body is the ignition, this is the part you will push down in order to start the heating element. Attached to it is the safety, which, when spun counter-clockwise, will stop you from being able to push down the ignition. Just spin it clockwise to unlock when you’re ready to vape!
    • Telescopic Tool – Above that you’ll find a detachable silver piece that you can turn clockwise and counter-clockwise to adjust the size of the vaporizer. Spinning it counter-clockwise will lengthen the KTS and reveal another layer underneath. That layer can also be spun to extend the size of the body.
    • Airflow Control – This piece is where the air will be coming through, the three holes you see on it are vents that allow air to pass through when you’re taking a pull from the mouthpiece.
    • Heating Element – This piece looks like a tube inside the atomizer you attach to the KTS. You should notice a little hole on the tube, inside of which are wicks that allow the heating element to vaporize the eLiquid it touches. The KTS also comes with a backup heating element.
    • Mouthpiece – You’re going to put your mouth here.
    How To Use The KTS Mechanical Mod

    The KTS Mechanical Mod and X8 Atomizer fully put together.

    If you bought the special edition of the KTS Vaporizer, you’ll find an X8 Atomizer as well that wasn’t covered in the above breakdown. We’ll explain how to use it further below as we get into our next section.

    How to Use the KTS Mechanical Mod Vaporizer

    Okay, so you’ve got your KTS Mechanical Mod. For simplicities sake, i’m going to assume you’ve got the X8 atomizer that came along with it, which looks like the atomizer you’ll see below.

    How To Use The KTS Mechanical Mod

    The X8 Atomizer is connected to the top of the KTS Mechanical Mod.

    But first, before we can get to the atomizer- we need to place the battery into the KTS body.

    • Placing the Battery Inside the KTS

    Like the assumption i’m making with the atomizer, i’m going to assume you’re using the 18650 batteries that came with the KTS.

    How To Use The KTS Mechanical Mod

    KTS Mechanical Mod Specal Edition Contents

    We recommend you make sure the safety is tightened counter-clockwise so that you can not push down the ignition.

    First, you’re going to disconnect the airflow connection from the KTS body. Next, place the battery inside the KTS body (make sure you place it with the negative side going into the KTS body, and the positive side sticking out on top). Now, if you hold it sideways with the ignition on the left side and the opening for the battery on the right, you’ll notice that on the right side of the body there is a small piece you can spin. Spinning this piece will extend the size of the KTS body, allowing you to reconnect the airflow control. If extending that piece isn’t enough, you can also spin the layer underneath it to further extend the body, which you will have to do if you’re using the 18650 batteries that came with the KTS. You don’t have to be precise when you’re extending the telescopic tool because after you reattach the airflow chamber you can go ahead and retract it as much as you need to tighten it up to your preference.

    If you’re using a battery that didn’t come with the KTS, the process is the exact same, the only thing that will change is the size of the KTS body after you’re done using the telescoping tool.

    • Reattach the Airflow Chamber

    This part is pretty self explanatory, just reconnect the airflow chamber back onto the KTS body over the battery. Feel free to tighten the KTS to your liking. If you took apart any of the other attached pieces (such as the heating element, mouthpiece, or atomizer) reattach them as well. The heating element connects into the airflow chamber, and the mouthpiece attaches to the heating chamber with the side containing the black ring going into the heating element.

    • Make Sure the Atomizer is Firmly Attached

    Assuming you’re using the X8 Atomizer, there is a little screw that should now be sticking out of the side of the atomizer, above the airflow chamber. Make sure this is attached tightly so that you can’t easily pull off the atomizer and have your eLiquid spill out everywhere, like all over your favorite shirt.

    • Fill The Atomizer with eLiquid

    On the X8 Atomizer, you’ll be filling the eLiquid by loosening the screw on the top of the atomizer and dripping your eLiquid into the hole hidden underneath. You don’t need to remove the mouthpiece in order to fill the atomizer if you’re using the X8. Be aware that the capacity for the X8 atomizer is 2.5ml.

    After you’ve finished filling the atomizer, put the screw back on and tighten it firmly.

    • Begin Vaping

    With everything put together, loosen the safety to allow for the ignition to go as far down as the safety will allow. Put the mouthpiece to your mouth, take a pull while holding down the ignition, and there you have it. The vaporizing process should begin and you should be vaping with ease.

    Thanks For Reading Our Guide on How to Use the KTS Mechanical Mod Vaporizer!

    We hope you found our guide helpful and informative. We love the KTS Mechanical Mod and we hope you’ll love it too.

    Buy it here: KTS Mechanical Mod Vaporizer (Special Edition)

    Happy Vaping!