Today we’re going to show you How to use Atmos Jump Vaporizer. We are going to start by looking at the device and how to charge it.
When you receive the unit your initial charge will be for six hours. This condition is a must to the battery for future lifespan. we recommend using a laptop or computer to charge or a standar wall adapter.
When the Atmos Jump battery is running low the Led indicator light will flash 8 times. After three low battery notifications the Jump will shut off to recharge.
To recharge the Atmos Jump, can be charged through the micro USB connection located at the bottom of the device.
When attached to the charger, the charging indicator light will shine red to indicate the devices accepting a charge.
This light will stop shining when the device is fully charged. Regularly the Atmos Jump will take up to four hours to fully charge, but only charged the Atmos Jump until the red light turns off.
Now let’s load the Atmos Jump with our product!
Turn the mouthpiece counterclockwise, take off the mouthpiece revealing the heating chamber.
When placing your product into the chamber break it up with your hands fill the chamber to the top and pack it down lightly. Then turn the mouthpiece clockwise to secure it back over the heating chamber.
Once your dry herbs are packed into the heating chamber press the power button three times very quickly, the indicator light will shine yellow to show the unit is heating.
Once the temperature reaches about 400ºF/204ºC, the indicator light will shine green.
Now it’s time to inhale slowly!
The Atmos Jump will automatically shut off after four minutes, this is the device’s safety duration to reactivate the heating element simply click the power button three times very quickly and that’s all there is to keep using the Atmos Jump.
Happy Vaping! 🙂