Guide: How to Use the Firefly 2 Vaporizer

How to use the Firefly 2 Vaporizer

A step by step on how to use the Firefly 2 Vaporizer, and to get the perfect hit from one of the Best vaporizers in the market.

Well, the answer to that, is right here!

Indeed, opening your new Firefly 2 vaporizer is an aesthetic delight – but how do you get the most out of your gorgeous new purchase? Here are some tips and tricks that get your new Firefly 2 working for you just how it should. It’s not difficult; just follow this how-to guide to get that massive, delicious hit you’ve been searching for…

Before using your Firefly 2 you may want to install and update the software from your phone. This is not necessary, but it is advisable. The process is quick, and it will give you more control over the temperature. You can find instructions on how to install the software at the end of this guide.

How to use the Firefly 2 Vaporizer

1. To use the Firefly 2 vaporizer, lift off the top cover – it’s magnetized and should pull off easily. Your favorite dried herbs will be put into the circular heating chamber.

2. How much you pack in, and how finely ground it is, greatly affects how the Firefly hits. I would recommend grinding it up very coarse, coarser than you would think.

3. Sprinkle it into the heating chamber loosely, then gently tamp down with your finger, but do not push it in hard. Be careful not to over pack the chamber. Packing it in this way helps deliver a smoother and more intense hit. Having said that, it also works really well if you are lazy and decide to just shove an unground up nug in there, when you don’t feel like or can’t use a grinder.

4. After loading it, place the top back on the Firefly 2. You should feel the magnets pull it into place with a satisfying snap.

Now, Ready to Go!

5. YES! You are now ready to hit your Firefly 2! Pick the vaporizer up in the palm of your hand and place your index fingers on both of the two capacitive buttons on the sides. Hold your fingers there, until you see the LED on top turn solid green. Keep holding the buttons, put your lips on the mouthpiece and start to draw the air in. Many convective vaporizers require you to pull very softly to get the best hit, making them difficult to use, as they only have a small margin of error. However, the Firefly 2 requires a very natural, effortless draw. Not too hard, not too soft – imagine you are smoking a pipe. It’s easy to get the perfect draw – especially if you don’t overthink it.

6. As you hit it, you will notice the flavor change after a few draws. Once you begin to taste burnt popcorn, it’s almost done, and you need to reload the bowl soon. Opening up the Firefly 2 vaporizer, and giving the heating chamber a little stir will let you get a few more draws out of it. If you don’t have anything available to stir it with, give it a few light smacks on your palm to move what’s inside around a bit.

7. While you are using your Firefly 2, make sure you are always charging the extra battery! The Firefly 2 comes with two, so if you charge one while using the other, you’ll never have to prematurely end your session because the battery ran out.

8. After using the Firefly 2 vaporizer, make sure to clean it thoroughly according to the instructions in the box. Cleaning the Firefly 2 is easy, and even easier if you do it right after finishing your session. If you neglect it, the heating chamber can get sticky over time. Every once in a while, lightly dampen some lint-free cloth or paper with rubbing alcohol. Then gently wipe clean the inside to keep it in great condition so you can use it for years to come.

Installing The Firefly 2 Vaporizer Software Onto Your Device

The Firefly 2 vaporizer has an available software update, which gives you additional ways to adjust your device. The software is available on either Android or iOS, and the process is simple and quick:

  • Install the “Firefly Vapor” app on your smartphone from the iTunes app store or Google Play.
  • Make sure your phone has Bluetooth on, turn on the app, and follow the instructions on screen.
  • You now have access to settings that allow you to completely fine-tune your Firefly 2 vaporizer.
  • After selecting a temperature setting, you can now adjust the power curve to modify the heating profile. A hotter setting will hit harder, and a lower one will be tastier longer. But be careful, as the hottest setting with the power curve on max is just about hot enough to cause combustion, and too low a temperature will not give satisfying draws.
  • Play around with it to find your preferred sweet spot.

Happy Vaping! 🙂

Get more info vaporpuffs

2 replies on “Guide: How to Use the Firefly 2 Vaporizer

  • Spike

    Now you mention it comes with two batteries which it does, but as far as I’m aware you can’t charge one while using the vape? Or is there another accessory I haven’t heard of? My biggest bug bear with mine is that I can’t charge the other battery without not using the vape.

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.