Guide: How To Use The AR Desert Camo Mech Mod

Welcome to the Vapor Puffs guide on how to use the AR Desert Camo Mech Mod. This guide will start by giving a bit of a run down on the parts of the AR Desert Camo Mech Mod before going into a step by step guide on how to make it work.

What Is The AR Desert Camo Mech Mod?

The AR Desert Camo Mech Mod is an analog mod covered from top to bottom in vent holes. They’re made for use with 18650 batteries.


  • Threading Connection-Top Cap – Found at the top end, this side has a 510 threaded hole on the outside. When removed, it reveals a Silver and Copper plated surface that will make contact with the battery.
  • Battery Tube – This is the main part of the AR Desert Camo, and it’s where your batteries will go into. It’s covered in vent holes, 20 total.
  • Firing Button-Bottom Cap – On the bottom end is the firing button that will make the second silver and copper plated contact connect to the battery when pushed.

How To Use The AR Desert Camo Mech Mod

  • Remove the Bottom Cap

First, we’re going to have to insert the battery into the AR Desert Camo Mech Mod. In order to do that, remove the bottom cap from the battery tube. Now, insert your batteries into the battery tube with the positive end towards the top cap. Afterwards, re-attach the bottom cap to the battery tube.

  • Attach the Atomizer

Now grab your 510 threaded Atomizer and attach it to the 510 threading connection on the top cap by lining it up with the threading hole and then twisting it clockwise until it’s attached.

  • Begin Vaping

Once everything is good to go, hit the firing button on the bottom of the AR Desert Camo Mech Mod and hold it down. You should notice your atomizer begin to work, and from here on everything should come naturally.

Thanks For Reading Our Guide On How To Use The AR Desert Camo Mech Mod!

We hope we’ve helped you get it working.

Buy It Here: AR Desert Camo Mech Mod

Happy Vaping!


Leave a Reply

Your email address will not be published. Required fields are marked *