Guide: How To Use The G20 Vaporizer

Welcome to the Vapor Puffs guide on how to use the G20 Vaporizer! We’re going to begin by breaking down the components of the G20 and then going through how to use it.

What is the G20?

The G20 is a dry herb vaporizer pen that has a built in screen over a coil in order to vaporize your dry herbs. Each G20 box comes with two vaporizer pens.

Cloud Vaporizer g20


  • Mouthpiece – This is where your mouth will go. You can remove this part by pulling it in order to reveal the next part.
  • Heating Chamber – You’ll be putting your herbs in here on top of the screen found when you remove the cap. This piece can be removed from the battery by pulling up from the silver ring.
  • Power Button – This is used to turn on the G20 and start the vaporizing process.
  • Battery – This part is inaccessible by the user but it’s the entire part connected to the power button. It can be charged through the small port on the bottom.

How To Turn On The G20

The G20 is turned on and off by pressing the power button 5 times consecutively and rapidly. You’ll know that it’s on when you see the power button blink a few times. This method can seem confusing to first time users of vaporizers but the reasoning is sound. It allows for a greater output from the battery and is an additional safety feature to keep the G20 from turning on without your knowledge.

How To Use The G20 Vaporizer

  • Remove the Mouthpiece

Pull the Mouthpiece off in order to reveal the Heating Chamber.

  • Fill the Heating Chamber

Remove the cap on top of the mouthpiece so you can see the steel mesh screen inside. Fill the heating chamber by placing your dry herbs directly onto the steel mesh screen. Fill it up about halfway with dry herbs and then put the cap back on top of the Heating Chamber. Then place the Mouthpiece on top of the Heating Chamber.

  • Turn On The G20

Like it is mentioned above, press the power button 5 times consecutively and rapidly in order to turn on the G20.

  • Begin Vaping

Hold up the mouthpiece to your mouth and hold down the power button. From here on, everything should come naturally. Repeat these steps until you’re finished.

Thanks For Reading Our Guide On How To Use The G20!

We hope we’ve helped you get it all figured out.

Buy it Here: G20 Vaporizer

Happy Vaping!

2 replies on “Guide: How To Use The G20 Vaporizer

  • chris

    How long do I charge the battery with wall adapter. It shows red light glowing. Does this change green when charged? Can I use migro g if still connected to wall charger?

    • Alexa L.

      Hello Chris,

      It should absolutely turn green when charged. We recommend an initial 6 hour charge. We don’t recommend using the unit while it is set to charge, as well.

      Thank you!


Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.