Guide: How To Use The Maraxus Mechanical Mod

Welcome to the Vapor Puffs guide on how to use the Maraxus Mechanical Mod! This guide will begin with an introduction to the individual parts of the Maraxus and then we’ll show you how to make it work.

What Is The Maraxus Mechanical Mod?

The Maraxus Mechanical Mod is a fully analog mod that makes use of two gold-plated brass contacts and a floating center pin. It’a made of stainless steel, and is telescopic to allow for different battery sizes.

How To Use The Maraxus Mechanical Mod

From Left to Right, Bottom Contact, Maraxus Telescopic Body, and Threading Connection.

  • Bottom Contact – This piece will make contact with the battery inside of the Maraxus. It also will function as the On/Off switch by pressing down on the center.
  • Maraxus Telescopic Body– This is the hollow tube your battery will be placed within. By twisting either end, you can change the size of the body so that it can fit different kinds of batteries. One of two airflow rings on the Maraxus is connected to this part.
  • Threading Connection – This part will also make contact with the battery inside of the Maraxus. On the outside, it’ll be used to connect your atomizer. The second airflow ring is found right underneath this part.

How To Turn On The Maraxus Mechanical Mod

The Maraxus doesn’t have a formal off/on switch but unlike many of it’s competitors, it does give you a hint as to how turn it on and off. The way the Maraxus works is when the battery is touching the contacts on both sides of the Maraxus Body, it is turned on. Once the battery is inside, you can push and hold down the center part of the Bottom Contact and it will begin the vaporizing process.

How To Use The Maraxus Mechanical Mod

  • Insert the Battery

Remove the Bottom Contact and place the battery inside. If your battery doesn’t fit, twist the Maraxus Telescopic Body until it extends over the battery. Then, reattach the Bottom Contact.

Note: If the Battery at any time touches both contacts inside the Maraxus, it will turn the battery on.

  • Attach an Atomizer and Begin Vaping

Now attach your atomizer to the threading at the top of the Maraxus Mechanical Mod. You’ll do this by turning the atomizer conductor clockwise into the center of the threading until it is firmly attached. Once you’re ready to begin vaping, you can push down and hold the center of the Bottom Contact to begin the vaporization process.

Thanks For Reading Our Guide On How To Use The Maraxus Mechanical Mod

We hope you’ve gained a clear understanding of how it works and how to make it work for you. Thanks for Reading!

Buy it Here: Maraxus Mechanical Mod

Happy Vaping!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.