QUICK LINKS

Welcome to the Vapor Puffs guide to the iTaste MVP 2.0! This guide will begin with an explanation of the various parts of the MVP 2.0, continue with some basic instructions on use, and finish up with some tips and tricks regarding this versatile vaporizer. First, though, for those of you who may not know, here’s some background.

What is the iTaste MVP 2.0?

The iTaste MVP 2.0 is an extremely adaptable eLiquid-only vaporizer. By adjusting the voltage and wattage, and replacing the atomizer with any of your choosing, the MVP 2.0 can be customized to your exact preference. Before we get any more specific with your options, let’s look at what you get when you open the box:

  • Mouthpiece – This is pretty self-explanatory. It’s the piece for your mouth. This is actually part of the iClear 30 included in the set.
  • iClear 30B Tank – While this cartomizer actually contains multiple parts, the atomizer head and the 3ml tank, it functions as a single unit, and can be replaced with any other atomizer of your choosing with either 510 or Ego threading. This is where you put your eLiquid.
  • Beauty Ring – Place this in the connection between your atomizer and the battery. It covers the extra threads, adding a sleeker feel to the vape.
  • 2600 mAh iTaste MVP 2.0 Battery – This is what makes this vaporizer so special. The digital readout on the battery allows for much more access to exactly what’s going on than most eCigarettes, while the 2600mah capacity and passthrough-capability means you’ll never be stuck without your vape, even on the rare occasions you need to charge it.
  • Charging Cable – This plugs into the input slot on the bottom of your eCig.

How to use the iTaste MVP 2.0

  • Fill the iClear 30 with your eLiquid of choice

Unscrew the top of the atomizer and drip your eLiquid into the tank. Be very careful not to get any eLiquid into the central tube; it may not harm your tank terribly, but it will taste awful.

  • Attach the Tank to the Battery

Screw the tank onto the connection, optionally placing the beauty ring in between for aesthetics.

  • Turn it on

Rapidly pressing the silver power button on the front of the MVP 2.0 three times will turn it on, activating the digital display on the side. Note that you can use this vaporizer even while it is charging, due to the aforementioned passthrough-capability. Press the button three times again to shut it off.

  • Adjust your Voltage and Wattage (Optional)
If you just want to start using your MVP 2.0, and figure out your preference later, you can skip this step. Holding down the U button for three seconds will enter Voltage Adjustment Mode. The voltage will be displayed on the readout, and pressing the U button again will adjust the voltage in 0.1 volt increments. Doing the same procedure with the P button will active Wattage Adjustment Mode, where you can change the wattage in intervals of 0.5 watt.
  • Start Puffing!

When the device is on, simply hold the power button to start vaping. If you hold it for more than ten seconds in a row, the MVP 2.0 will stop producing vapor. This is a safety feature, just release and repress the button.

Tips and Tricks about the iTaste MVP 2.0

You may have noticed a number appear on the display before changing the voltage or wattage. This is the MVP’s puff counter, telling you the number of times the eCigarette has been used since it was last turned on. Holding either of the buttons for only a second will also show this.
If you depress both the P and U buttons for two seconds, the display will show you the resistance, in ohms, of your atomizer, then the voltage of your battery (anything below 3.6V is getting low), and finally the puff counter again.
The LED will display green, yellow, or red, depending on the voltage of the battery. It switches to yellow around halfway through discharging. The above method of checking the battery is more accurate, but in combination with this signal light, it ensures you’ll never be surprised by a dead battery.
The best feature: Notice the USB port next to the charging slot? The MVP 2.0 can be used in a pinch to charge your phone, iPod, or practically anything else that uses USB, just to make the whole thing even more amazing.
Thank You for Reading Our Guide on How to Use the iTaste MVP 2.0
Happy Vaping!